Fast delivery
Deburring Handle - DARMET DG4100
Ergonomic Deburring Handle (3.2 mm, S/E type). High-quality NOGA NG1000 alternative with swivel mount for precise edge finishing
Availability: in stock
Dispatched within: 24 hours
Square clamp key 12 mm - DARMET
Square head screw wrench. Mainly intended for clamps' screws.
Availability: mała ilość
Dispatched within: 24 hours
Square jaw key 10 mm - DARMET
Wrench for square head screws. Mainly intended for screws in vises.
Availability: in stock
Dispatched within: 24 hours
Square jaw key 14 mm - DARMET
Wrench for square head screws. Mainly intended for screws in vises.
Availability: in stock
Dispatched within: 24 hours
Square jaw key 17 mm - DARMET
Wrench for square head screws. Mainly intended for screws in vises.
Availability: in stock
Dispatched within: 24 hours
Square jaw key 19 mm - DARMET
Wrench for square head screws. Mainly intended for screws in vises.
Availability: mała ilość
Dispatched within: 24 hours
Square jaw key 22 mm - DARMET
Wrench for square head screws. Mainly intended for screws in vises.
Availability: średnia ilość
Dispatched within: 24 hours
Square jaw key 24 mm - DARMET
Wrench for square head screws. Mainly intended for screws in vises.
Availability: in stock
Dispatched within: 24 hours
Square jaw key 8 mm - DARMET
Wrench for square head screws. Mainly intended for screws in vises.
Availability: in stock
Dispatched within: 24 hours
1.5 mm cutter for key copying and duplicating | VHM - DARMET
Diameter: 1.5 mm; Total length: 35 mm; Number of blades: 3; Application: key duplication
Availability: mała ilość
Dispatched within: 24 hours
125 mm movable middle jaw (set) for precision vises FPZ 125
Jaw width: 121 mm | Jaw height: 32 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
125 mm raised jaw inserts (set) for precision vises FPZ 125
Jaw width: 121 mm | Jaw height: 78 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
125 mm special soft jaw inserts (set) for precision vises FPZ 125
Jaw width: 125 mm | Jaw height: 32 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
150 mm movable middle jaw (set) for precision vises FPZ 150
Jaw width: 146 mm | Jaw height: 47 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
150 mm raised jaw inserts (set) for precision vises FPZ 150
Jaw width: 150 mm | Jaw height: 98 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
150 mm special soft jaw inserts (set) for precision vises FPZ 150
Jaw width: 150 mm | Jaw height: 40 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
175 mm movable middle jaw (set) for precision vises FPZ 175
Jaw width: 170 mm | Jaw height: 51 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
175 mm raised jaw inserts (set) for precision vises FPZ 175
Jaw width: 170 mm | Jaw height: 118 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
175 mm special soft jaw inserts (set) for precision vises FPZ 175
Jaw width: 175 mm | Jaw height: 43 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
2 mm cutter for key copying and duplicating | VHM - DARMET
Diameter: 2 mm; Total length: 35 mm; Number of blades: 3; Application: key duplication
Availability: in stock
Dispatched within: 24 hours
2-Flute Ball Nose R2.5 Solid Carbide, Short DIN6527-K, AlTiN Coated - 5 mm DARMET
Diameter: 5 mm; Radius: R2.5; Material: VHM; Coating: AlTiN; Number of cutting edges: 2; Cutter version: short
Availability: mała ilość
Dispatched within: 24 hours
2-Flute Ball Nose R3 Solid Carbide, Long DIN6527-L, AlTiN Coated - 6 mm DARMET
Diameter: 6 mm; Radius: R3; Material: VHM; Coating: AlTiN; Number of cutting edges: 2; Cutter version: long
Availability: brak towaru
2.5 mm cutter for key copying and duplicating | VHM - DARMET
Diameter: 2.5 mm; Total length: 36 mm; Number of blades: 3; Application: key duplication
Availability: mała ilość
Dispatched within: 24 hours
3 mm cutter for key copying and duplicating | VHM - DARMET
Diameter: 3 mm; Total length: 36 mm; Number of blades: 3; Application: key duplication
Availability: in stock
Dispatched within: 24 hours
3-Flute General Purpose Long End Mill DIN6527-L, Solid Carbide AlTiN Coated - 5 MM - DARMET
Material: VHM; Coating: AlTiN; Number of cutting edges: 3; Diameter: 5 mm; Cutter version: long
Availability: brak towaru
3-Flute General Purpose Long End Mill DIN6527-L, Solid Carbide AlTiN Coated - 6 MM - DARMET
Material: VHM; Coating: AlTiN; Number of cutting edges: 3; Diameter: 6 mm; Cutter version: long
Availability: mała ilość
Dispatched within: 24 hours
4-Flute Ball Nose R5 Solid Carbide, Long DIN6527-L, AlTiN Coated - 10 mm DARMET
Diameter: 10 mm; Radius: R5; Material: VHM; Coating: AlTiN; Number of cutting edges: 4; Cutter version: long
Availability: brak towaru
4-Flute General Purpose Long End Mill DIN6527-L, Solid Carbide AlTiN Coated - 3MM - DARMET
Material: VHM; Coating: AlTiN; Number of cutting edges: 4; Diameter: 3 mm
Availability: brak towaru
4-Flute General Purpose Long End Mill DIN6527-L, Solid Carbide AlTiN Coated - 7MM - DARMET
Material: VHM; Coating: AlTiN; Number of cutting edges: 4; Diameter: 7 mm
Availability: brak towaru
4-Flute General Purpose Short End Mill DIN6527-K, Solid Carbide AlTiN Coated - 14MM - DARMET
Material: VHM; Coating: AlTiN; Number of cutting edges: 4; Diameter: 14 mm; Cutter version: short
Availability: brak towaru