Fast delivery
Menu-EN
Price
-
from
to
In metalworking, fixturing is the term used to describe holding a part in a fixed position to allow precise fabrication within a specified tolerance. Clamping consists of two basic elements:
- An actual clamping tool, such as a vise, used to hold a component in place.
- Positioning and permanently fixing a clamping tool to a machine. This can include the use of clamping plates, T-tables, 4- or 5-axis components and many other devices that can permanently position the part.
105 mm Pull Stud (45°), Non-Through Type, BT40 to Morse Taper 3 - Darmet PS40.L105.K45MTB3
Availability: mała ilość
Dispatched within: 24 hours
115 mm Pull Stud (45°), Non-Through Type, BT40 to Morse Taper 4 – Darmet PS40.L110.K45MTB4
BT40-MTB4 to Morse Taper 4 | Non-Through Type | 45° Pull Stud | Length: 115 mm
Availability: mała ilość
Dispatched within: 24 hours
125 mm movable middle jaw (set) for precision vises FPZ 125
Jaw width: 121 mm | Jaw height: 32 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
125 mm raised jaw inserts (set) for precision vises FPZ 125
Jaw width: 121 mm | Jaw height: 78 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
125 mm special soft jaw inserts (set) for precision vises FPZ 125
Jaw width: 125 mm | Jaw height: 32 mm | Used in precision vises type FPZ and FPZB
Availability: brak towaru
150 mm movable middle jaw (set) for precision vises FPZ 150
Jaw width: 146 mm | Jaw height: 47 mm | Used in precision vises type FPZ and FPZB
Availability: brak towaru
150 mm raised jaw inserts (set) for precision vises FPZ 150
Jaw width: 150 mm | Jaw height: 98 mm | Used in precision vises type FPZ and FPZB
Availability: brak towaru
150 mm special soft jaw inserts (set) for precision vises FPZ 150
Jaw width: 150 mm | Jaw height: 40 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
175 mm movable middle jaw (set) for precision vises FPZ 175
Jaw width: 170 mm | Jaw height: 51 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
175 mm raised jaw inserts (set) for precision vises FPZ 175
Jaw width: 170 mm | Jaw height: 118 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
175 mm special soft jaw inserts (set) for precision vises FPZ 175
Jaw width: 175 mm | Jaw height: 43 mm | Used in precision vises type FPZ and FPZB
Availability: mała ilość
Dispatched within: 24 hours
44 mm Pull Stud (45°), Through-Hole Type, for BT40 Tool Holders – Darmet PS40.L44.1.K45
For Mazak BT40 Tool Holders | Through-Hole Type | 45° Pull Stud | Length: 44.1 mm
Availability: średnia ilość
Dispatched within: 24 hours
44 mm Pull Stud (45°), Through-Hole Type, for Mazak CAT40 Tool Holders - Darmet PS40.L44.1.K45CAT
Availability: mała ilość
Dispatched within: 24 hours
57 mm Pull Stud (45°), Non-Through Type, for BT40-B Tool Holders – Darmet PS40.L57.K45.BT-B
For BT40-B Tool Holders | Non-Through Type | 45° Pull Stud | Length: 60 mm | M16 Thread
Availability: in stock
Dispatched within: 24 hours
57 mm Pull Stud (60°), Non-Through Type, for BT40-B Tool Holders – Darmet PS40.L57.K60.BT-B
For BT40-B Tool Holders | Non-Through Type | 60° Pull Stud | Length: 57 mm
Availability: in stock
Dispatched within: 24 hours
60 mm Pull Stud (90°), Non-Through Type, for BT40-A Tool Holders - Darmet PS40.L60.K90.BT-A
For BT40-A Tool Holders | Non-Through Type | 90° Pull Stud | Length: 60 mm
Availability: średnia ilość
Dispatched within: 24 hours
Bench Vise | 100 mm Serrated Jaws | with Anvil and 360° Swivel Base - FORWARD 30404
30404 Ductile Iron Bench Vise. Features a 360° swivel base, hardened jaws, and a heavy-duty anvil. Built for professional metalworking and demanding workshop environments.
Availability: in stock
Dispatched within: 24 hours
Bench Vise | 100 mm Serrated Jaws | with Anvil and 360° Swivel Base - FORWARD FSV04
Professional FSV04 Ductile Iron Vise. Features 360° swivel base, hardened serrated jaws & large anvil. Perfect for heavy-duty workshop use and metal processing.
Availability: brak towaru
Bench Vise | 125 mm Serrated Jaws | with Anvil and 360° Swivel Base - FORWARD 30505
30505 Ductile Iron Bench Vise. Features a 360° swivel base, hardened jaws, and a heavy-duty anvil. Built for professional metalworking and demanding workshop environments.
Availability: in stock
Dispatched within: 24 hours
Bench Vise | 125 mm Serrated Jaws | with Anvil and 360° Swivel Base - FORWARD FSV05
Professional FSV05 Ductile Iron Vise. Features 360° swivel base, hardened serrated jaws & large anvil. Perfect for heavy-duty workshop use and metal processing.
Availability: in stock
Dispatched within: 24 hours
Bench Vise | 150 mm Serrated Jaws | with Anvil and 360° Swivel Base - FORWARD 30606
30606 Ductile Iron Bench Vise. Features a 360° swivel base, hardened jaws, and a heavy-duty anvil. Built for professional metalworking and demanding workshop environments.
Availability: in stock
Dispatched within: 24 hours
Bench Vise | 150 mm Serrated Jaws | with Anvil and 360° Swivel Base - FORWARD FSV06
Professional FSV06 Ductile Iron Vise. Features 360° swivel base, hardened serrated jaws & large anvil. Perfect for heavy-duty workshop use and metal processing.
Availability: mała ilość
Dispatched within: 24 hours
Bench Vise | 200 mm Serrated Jaws | with Anvil and 360° Swivel Base - FORWARD 30808
30808 Ductile Iron Bench Vise. Features a 360° swivel base, hardened jaws, and a heavy-duty anvil. Built for professional metalworking and demanding workshop environments.
Availability: in stock
Dispatched within: 24 hours
Bench Vise | 200 mm Serrated Jaws | with Anvil and 360° Swivel Base - FORWARD FSV08
Professional FSV08 Ductile Iron Vise. Features 360° swivel base, hardened serrated jaws & large anvil. Perfect for heavy-duty workshop use and metal processing.
Availability: średnia ilość
Dispatched within: 24 hours
Blank Arbor | DIN 2080 – 40MM – ZM KOLNO (Type 2190)
Standard: DIN 2080 | Length: 400 mm | Hardness: ~25 HRC
Availability: mała ilość
Dispatched within: 24 hours
Clamping chuck for ER25 collets – BT30 – 60 mm – ZM KOLNO (Type 7626)
External taper: MAS 403-BT | Taper size: 30 | Collet type: ER25 | Length: 60 mm
Availability: dostępny na zamówienie
Dispatched within: 3 dni
Clamping collet ER08 | 1.0 mm – APX (7618)
DIN 6499B | Allowable runout 0.010 ÷ 0.015 mm
Availability: wycofany z oferty
$14.71
Net price: $11.96
Clamping holder for ER11 collets with cylindrical shank Ø12 | 150 mm | - DARMET 754
Collet chuck holder ER with cylindrical shank.
Availability: mała ilość
Dispatched within: 24 hours
Clamping holder for ER16 collets with cylindrical shank Ø12 | 100 mm | - DARMET 754
Collet chuck holder ER with cylindrical shank.
Availability: średnia ilość
Dispatched within: 24 hours
Clamping holder for ER16 collets with cylindrical shank Ø12 | 50 mm | - DARMET 754
Collet chuck holder ER with cylindrical shank.
Availability: brak towaru
Having a clamping system increases productivity and efficiency, which generates higher productivity and significantly reduces set-up and changeover times. In addition, it allows the operator to make quick changes to the job, ultimately increasing production efficiency. And changing parts in a highly repeatable manner significantly increases the quality of the finished part. All this is achieved without interrupting production. Often too much time is spent assembling a single component in a machine. A key function in streamlining production is to develop a fixturing solution that optimises the machining of multiple parts simultaneously while maintaining tight tolerances.
Types of CNC tool holders
The tool holder is the machining component that usually holds the cutter in place. Its purpose is to hold the tool in place as accurately and firmly as possible, as a barely perceptible increase in runout can ruin a project or break a cutting tool.
Different types of toolholders have different levels of runout and balance. Their service life and durability also vary. Another important factor to consider when choosing a CNC toolholder is the time it takes to change cutters, as this has a direct impact on profit and production output.
Types
Tool holders vary based on the method used to hold end mills in place. Here is a basic overview of the types of tool holders for CNC milling:
- Shrink Fit Handles: This type of holder uses heating and cooling to apply clamping force to the cutting tool. Shrink-fit holders provide a firm grip and can significantly extend tool life.
- Sleeve holders: The collet mounts the cutter with a slotted collar. Standard collets are dimensioned to the millimeter, but can also be customized to meet customer needs.
- Weldon milling chucks: This type of milling toolholder uses a side screw to secure the cutting tool. They have different clamping diameters and are available in different lengths.
- Handles for threading dies: This category includes rigid tapping holders, floating holders and quick-change insert tapping machines.